![Autoxray updates](https://kumkoniak.com/4.jpg)
- Service Service must only be performed by AutoXray repair personnel.
- Click the UPDATE button and follow the onscreen messages.
- On some tools, the display will read 'Downloading, please wait', and on others the display will be blank.
- Power on the scanner, press CONFIG then arrow down to DOWNLOAD and press ENTER.
- Connect the 9-pin serial cable into the PC, and connect the other cable into the port on the top of the tool.
- Select the appropriate COM port (use Auto-detect if you are unsure).
- Enter the serial number of the scanner (either on the back of the scanner or underneath the batteries in the battery compartment).
- Select the appropriate update file (rtv240_2.jcb for EZ-Link and EZ-Read 2-line tools, or rtv240_8.jcb for EZ-Scan 8-line tools) from the drop-list.
- Select the 'ToolLink->Upload new tool software release' menu item.
- This will ensure that the rtv240_2.jcb and rtv240_8.jcb files are in the EZ-PC/issue or EZ-Update/issue directory.
- You must complete the EZ Web Update outlined above.
- To update a scanner to the latest version, follow the below update instructions: To update your EZ-Link/EZ-Scan/EZ-Read tool to the latest version (2.40): Thescanner updates are free of charge, however the EZ-PC or EZ-Update PC application is required to update a scanner to the latest version. Note: The PC-Link application is being replaced with EZ-PC since it's compatible with all of AutoXray's latest technology.
- Follow the EZ Web Update Wizard instructions to update an existing application(s).
- When prompted to Open, Run, or Save the EZWebUpdate.exe file, select Open or Run.
- Click the Update to Latest Version link below.
- To update an existing EZ-PC or EZ-Update application, or to upgrade your PC-Link application to EZ-PC, follow the below update instructions: To update PC-Link/EZ-PC/EZ-Update to the latest version (version 3.0): The web update is free of charge. These files are named rtv240_2.jcb (2-line display) and rtv240_8.jcb (8-line display) and are included with the PC software update outlined below. The newest tool software version is 2.40, and is available for both 2 line (EZ-Link and EZ-Read) tools as well as 8 line (for EZ-Scan). PC-Link users will be upgraded to EZ-PC free of charge. Update your PC software (PC-Link/EZ-PC/EZ-Update) to the latest version using the EZ Web Update link below. Set the Time Units for Capture Mode The EZ-Link scanner can be set up to capture a user.ĮZ-LINK UPDATE AutoXray tool and PC software update information The latest tool software version is included in the PC software update. Thank You for buying the EZ-SCAN Scanner from AutoXray, the leading provider in. Refer to the Product Warranty Policy section of this manual.